KSM Controller Setup

A message from masaka (creator of KSM)

This guide was originally intended for FAUCETWO controllers, but it should work for YuanCon’s SDVX 12 and SDVX LITE 3 as they also have an eAcloud mode.

Step 0

Before opening KSM, make sure your controller is in eAcloud mode:

For FAUCETWO/FAUCETWO+, hold down START + BT-A + FX-L + FX-R until all lights flash
For YuanCon SDVX 12 and SDVX LITE 3, unplug the controller and then while holding down BT-C, plug in the controller and wait until all lights flash. If this does not work, repeat the process but try holding down START + BT-C instead.

Step 1

Open KSM and enter OPTION

Step 2

For binding knobs, enter INPUT / JUDGEMENT SETTINGS

Step 3

Set INPUT TYPE OF LASER OBJECT to Analog Stick X/Y

Step 4

Return to the previous page and then enter KEY CONFIGURATION

Step 5

This page must be navigated with your keyboard’s arrow keys. Navigate to the bottom and change pages until you reach Gamepad 1. For each button on this page:

Select it with your arrow keys
Press Enter to change the current binding
Press the corresponding button on your controller

Once you are done, press ESC a few times to return to the title screen and you are ready to play!